TRS-Environmental - Schonstedt MAC-51Bx KIT Magnetic & Dual-Frequency Pipe & Cable Locator

Miscellaneous Environmental >> Pipe & Cable Locators

View larger image

Schonstedt - MAC-51Bx KIT Magnetic & Dual-Frequency Pipe & Cable Locator

Available For: Rent, Lease, Purchase

Rental Price

Please sign in for pricing.

New customer? Start here

*Qty

Not what you're looking for? View Category Listing and Manufacturer Listing

Available for purchase

Please sign in for pricing

We’re here to help! Call 800-532-3381 or

DESCRIPTION

SPECIFICATIONS

ACCESSORIES

DOWNLOADS

The MAC-51Bx - the most cost-effective, all-purpose locating system on the market - consists of a magnetic locator, and a null-over-target pipe and cable locator capable of locating on two frequencies: 571Hz and 82.5kHz. The receiver has a three position switch that lets you change modes between LO, HI, and MAG for cable and line tracing with break locating, pinpointing a ferrous metal target, or identifying and pinpointing an energized 50/60 Hz power line. In the LO and HI modes, the receiver's audio signal provides a sharp null when its tip is directly over the target. In the MAG mode (no transmitter required) the audio signal peaks when the receiver's tip is over a ferrous target. You can trace the 571 Hz LF signal conductively applied to any continuous metal conductor up to 4000 feet. The receiver's on-the-fly mode-changing feature lets you locate a complete break using the LO mode, and then continue on to trace beyond the break in the HI mode, or trace a metal pipe joined with non-conductive gaskets. The MAC-51Bx is shipped in a hard-sided carrying case with the MT-2 mini-transmitter, which emits a strong signal that you can detect and trace at depths up to 18 feet using the MAC-51Bx receiver set to the HI mode. This expands locating and tracing capabilities to non-metallic pipes, concrete septic tanks, utility tunnels, and allows for greater pinpointing of obstructions. Inductive signal clamps are also included with the locator. A headset is an optional accessory.

Specifications

Audio Output: ~40 Hz Idling Tone, Frequency of Pulsing Tone Increases or Decreases with Signal Intensity
RF Output: 82.5 kHz Modulated at 382 Hz, Pulsed at 4.4 Hz
Transmitter Audio Indicator: 2.58 kHz, Pulsed at 4.4 Hz
Modes: Lo & High (Sharp Null If Tip Over Target), Mag (Does Not Use Transmitter, Audio Peaks Over Target)
Receiver Operating Voltage: 9V, Transmitter Operating Voltage: 12V
Operating Hours: 60 Hours (Intermittent)
Weight: ~8.15 lbs (3.7 Kg)

Accessories

Qty.	Description
1	Ground Spike
1	Induction Clamp
1	Battery Holder
1	Conductive Clamp
1	Instrument Case
8	C Type Battery
2	9 Volt Lithium Battery
0	Headset
1	Instruction Manual for MAC-51BX
1	Mini-Transmitter (mole)

Downloads

Specs

Manual

YOU MAY ALSO NEED

Fluke TI25
Thermal Imager, On-Screen Emissivity Correction, Voice Annotation

Schonstedt GA-72Cd
Metered Magnetic Pipe & Cable Locator

FLIR i60
Thermal Imager, Scalable Picture-in-Picture, Built-In Lamp & Laser, Laser Marker Function, Auto Hot/Cold

Well-Vu Water Mocassin Junior
Miniature Diameter Borescope System