The Ion Science Mercury Vapor Indicator (MVI) uses a dual-beam ultra-violet detector and is equipped with a high performance pump, which help to identify limited amounts of mercury vapor. The MVI's dual beam technology means the instrument does not saturate or require regeneration between readings as do traditional gold film detection methods, ensuring instrument downtime is eliminated. The MVI has a fast response time - approximately 3 seconds and its accuracy is greater than most competing models ( /- 10% compared to /- 20% accuracy from other manufacturers). After a short warm-up, the MVI gives real-time indication of mercury vapor levels through the PTFE probe. This instrument provides continuous readings, and there is no need to regenerate the instrument between readings. Ergonomically designed with simple, one handed operation MVI is the ideal survey unit for rapid, accurate levels of mercury vapor detection. The MVI is shipped with a hard case, charger, and needed filters.
Part No. 703-0011
Specifications
Detector: Dual-Beam Ultra-Violet Absorption Module
Ranges: 0.1 to 199.9 & 1.0 to 1,999 ug/m3 (ppb)
Accuracy: +/- 5 micrograms or +/- 10% of Reading
Resolution: 0.1 & 1.0 ug/m3 (ppb)
Repeatability: +/- 5% FSD
Response Time: Approximately 3 Seconds
Flow Rate: 1,500 cc/min, 1.5 Liters per Minute (L/min)
Power: Ni-Cad Rechargeable Batteries
Battery Life: Up to 8 Hours from a Full Charge
Temperature Range: 10 C to 50 C
Alarms: Audible Alarm Factory Pre-Set to 25 ug/m3 (ppb)
Weight: 6 lbs, 10 oz
Dimensions: 145 x 295 x 80 mm
