The BUCK Libra Plus LP-20 air sampling pump is a good choice for a variety of applications in which personal exposure needs to be assessed; it is designed to draw an air sample through analytical media (i.e., cassettes, detector tubes, impingers) at a flow rate between 5 to 20 Liters per minute (L/min). The single diaphragm pump is encased in high-impact, anti-static Lexan material and proves to be a very quiet pump. The LCD display consists of 2 lines and shows the user flow rate, accumulated volume and elapsed time of the sample. It is also user-friendly, as you choose RUN for sampling and MENU to reset pumps from the main display. This pump is equipped with a patent-pending electronic circuit board that extends the life of the powerful Nickel Metal Hydride (NiMH) triple battery pack (4.8V, 6.45Ah) to ~30 hours (continuous use at 5 L/min). The keypad locking system is password protected for tamper-proof operation and tools are not needed to use and modify the pump.

Features:

• Constant flow, high back pressure capability for 25mm 0.45u asbestos filters


• Flows up to 20 LPM for special cyclone requirements


• Flow compensation for filter plugging and battery voltage


• Dual flow range easily handles Impingers, cyclones, and tubes


• Auto-restart within one minute of a flow fault


• Battery pack rechargeable while attached or separately


• Stainless steel belt clip with built-in tripod connector

PhoCheck 5000 is a highly sensitive patented photoionization detector (PID). With a dynamic detection range spanning 1 ppb up to 10,000 ppm, PhoCheck is the first PID on the market able to embrace the detection of Volatile Organic Compounds (VOCs) at low toxicity thresholds and high explosive limits. With increased memory capacity for data logging results every second and improved PC communication via IRDA technology the PhoCheck is the ideal PID for giving you truly traceable results.

The 5000Ex is ATEX-approved as intrinsically safe and has a detection range of 1 ppb - 10,000 ppm. This model logs data and is equipped with a date/time stamp feature and STEL/TWA values.  With user set single point alarms and a gas table of over 450 gases, including their unique response factors, the PhoCheck 5000 is equipped to detect a wide range of VOC's. Typical gases detected include: VOCs; ammonia; benzene; ethylene; isobutanol; gasoline vapors; jet fuel; liquified petroleum gas; butane; acetaldehyde; and, some WMD's.

Typical Applications:

• Workplace Noise Assessment


• Environmental Noise Assessment


• Administrative & Engineering Controls Selection


• Noise Ordinance Enforcement


• Hearing Protector Selection


• Task-Based Exposure Assessments

The MultiRAE is the latest model offered by RAE Systems (in the same family as the MultiRAE Lite and MultiRAE Pro).  This newest and innovative model includes six sensor ports that can support a PID (Photoionization Detector) for the detection of volatile organic compounds (VOCs) and over 30 different catalytic, NDIR or electrochemical sensors (combustibles, toxics, carbon dioxide and oxygen).  These sensors are 'intelligent' and store calibration data for in-field swapping.  All MultiRAE units are manufactured with a sampling pump (the MultiRAE Lite model has a diffusion option).  They will have a wireless capability option in early 2012.

This instrument comes standard with O₂, LEL, CO and H₂S and has the largest display on the market for its class. It is equipped with a Man Down Alarm option for added security.  The MultiRAE can be used as a personal monitor, a hand-held sniffer, or as a continuous operational area monitor (logs continuously for 6 months).  This model includes an accessories kit with a hard transport case, and remote sampling probe with 10 feet of Teflon tubing.

Part No. MBB3-A1C112E-020

The RAELink 3 Modem Kit is a wireless detection system that allows the user to integrate multiple RAE air and radiation monitoring instruments, as well as limited third-party devices into a host system.  This host system links the instruments and tranmits sensor data and GPS coordinates (if applicable) to a remote computer, which can be located up to 2 miles from the site (this pertains to an urban setting; site conditions dictate distance).  The command computer (PC) uses ProRAE Remote software to log and manage the data in a user-friendly intuitive format. 

The RAELink 3 has Bluetooth capabilities and connects easily to Bluetooth-equipped monitors.  These weatherproof and shock resistant modems are equipped with a backlit, easy-to-use display that also indicates radio strength.  The RAELink 3 900 MHz modems have an intuitive interface that allows the user to configure in the field to a variety of instruments.  These RAELink 3 Modem Kits can be configured as the host modem, the remote modem or as a repeater to establish line-of-sight.

The RAELink 3 supports the following instruments: MultiRAE Plus, MiniRAE3000, ppbRAE3000, UltraRAE3000, ChemRAE, AP4C and the DustTrak II 8530 (adapter required).

The GX-2009, the smallest and lightest 4-gas monitor in the world, simultaneously monitors and displays combustibles (LEL), oxygen (O₂), carbon monoxide (CO), and hydrogen sulfide (H₂S). The GX-2009 is designed around RKI's compact and proven sensors, utilizing catalytic combustion, electrochemical and galvanic sensor technologies. Each miniaturized sensor is manufactured with the same high quality control that has made RKI sensors and instruments the most reliable and long lasting monitoring devices in the industry.

It includes dual audible alarm ports and alarm LED's on 3 sides of the instrument, so that alarm conditions are obvious from multiple perspectives especially in high noise environments. All features are operated through 2 glow-in-the dark, glove-friendly buttons. The GX-2009 stores up to 8 alarm trend sessions where readings are recorded 30 minutes before and after an alarm event. The data logging has a 3,600 data point capacity with a log time range of 10 to 300 hours based on programmable interval times. Data logging software will also store up to 100 calibration records and is Windows XP and Vista compatible. Please specify if you need the USB or RS-232 communication cable with your rental; this cable is required to transfer the data to your PC.

Includes hard-sided carrying case, RP-6 pump, 10-foot hose and probe.

The custom designed, weatherproof Environmental Enclosure protects the DustTrak II and DustTrak DRX Aerosol Monitor Models 8530, 8531, and 8533, TSI portable, battery-operated, laser photometers that measure and record airborne dust concentrations. This wind- and rain-proof environmental enclosure allows you to make the same accurate and precise measurements outdoors and in harsh industrial environments. The optional internal battery system includes two extended-life batteries, which allow 24-hour operation for long-term unattended sampling (this is a separate rental). The Environmental Enclosure comes with an omni-directional sampling inlet specifically designed to sample efficiently in a broad range of wind conditions. The inlet on the enclosure samples most efficiently from 0 to 22 mph. The enclosure can be mounted to a standard surveyor tripod (using a 5/8-inch thread). Included Items: Environmental Enclosure; Battery Charger; and Water Trap. Optional Rental: DustTrak II, DustTrak DRX or Internal Battery System.

Features and Benefits:

• 360-Degree Omni-Directional Sampling Inlet


• Efficient Sampling in a Broad Range of Wind Conditions (Up to 22 mph)


• Extended-Life Battery for Continuous 24-Hour Monitoring


• Protection from Wind and Rain


• Field Portable


• Enclosure Provides Additional Protection and Security to the Instrument

The new DustTrak II Aerosol Monitors are battery-operated, data-logging, light-scattering laser photometers that give you real-time aerosol mass readings. The DustTrak II uses a sheath air system that isolates the aerosol in the optics chamber to keep the optics clean for improved reliabililty and low maintenance. Suitable for clean office settings as well as harsh industrial workplaces, construction and environmental sites, and other outdoor applications (DustTrak Environmental Enclosure 8535 is an optional rental). DustTrak II Aerosol Monitors measure aerosol contaminants such as dust, smoke, fumes, and mists. Includes: TRAKPRO Software, Zero Filter, AC Adapter, Impactors & Cyclone.

Applications:

• Industrial/Occupational Hygiene Surveys


• Indoor Air Quality Investigations


• Outdoor Environmental Monitoring


• Fugitive Emissions Monitoring


• Site Perimeter Monitoring


• Fenceline Monitoring


• Dust Control Operations


• Environmental Research Studies


• Baseline Trending and Screening


• Point Source Monitoring


• Engineering Studies


• Engineering Control Evaluations


• Corrective Action Validation


• Remote and Process Monitoring


• Emissions Monitoring


• Aerosol Research Studies